
—
OMGA
BA 825
Hardware assembly center for door and window frames
Code: 1147
restore Production year: 2001 error_outline Status: Good
domain Availability: In stock check_circle EC legislation: Compliant
Production year:
2001
Status:
Good
Availability:
In stock
EC legislation:
Compliant
Description
Hardware assembly center for door and window frames
OMGA BA 825
Starting with the basic version, the has a modular design to suit different needs.
The following operations can be performed:
Measuring and positioning the workpiece for cutting the hardware, fixing the hardware (automatically fed or manual screwing unit), drilling holes for handles, “0 ENTRY” routing and cutting the glazing beads (also for tenoned ones).
The standard version of the bench has: pneumatic stop (for measuring the length and cut to length of the hardware and/or glazing beads).
Positioning stops 8 tracks, 32 stops.
Automatically fed screwing unit with carriage.
Laser Pointer.
Pneumatic compensator panels.
Hardware storage. Maximum capacity 350 kg, distributed equally, 17 loading chambers, 220 mm wide, 120 mm deep, minimum ceiling height: 3800 mm
Technical details
Effective working
Effective length
450 - 2800 mm
Effective width
250 - 1000 mm
Details
Screw gun
check_circle
Screws charger
check_circle
Generals
Sizes*
4000x1700x920 mm
Weight*
900 kg
*Shown values may vary depending on the configuration of the machine.
Related machineries
OMGA BA 782 F PH
Assembly bench for frames
Assembling table
OMGA BA 782 F PH
Assembly bench for frames
The bench BA 782 is used to block the casement in a correct position to easily perform the following operation:
assembling the condensate water drains aluminium profile, assembling the hinge, assembling the windows striker plate, assembling the glass
putting toghether the window casement amd wings
assembling the shutter with the window
making easy yhe un...
SAC SUERI TG 45
Assembly bench for frames
Automatic working table for checking and cutting of class beads at 45°
SAC SUERI TG 45
Assembly bench for frames
The working table of the TG45 is often used for the final checking of the sashes as well as for puttying and sanding the sashes. The glass bead is then extracted and stapled on the sash by means of a stapler.
The TG45 allows the cut of 2 glass beads at the same time, thanks to its pneumatic system that reads the internal dimension of the sash automatically and to the positioning of the two cu...
Request infos
OMGA BA 825