Effective length:
4200 mm
Effective height:
2200 mm
Effective thickness:
60 mm
Scoring (Optional)
Description
GMC KGS/GMC 400M
A monobloc structure, rigid and stable, with at most small size allows to dissect very large panels in a minimal space.
For over fifty years we build vertical panel saws. This experience has enabled us to design a kind of simple and practical to use panel saw, at a very affordable price.
Steel upper guide hardened and rectified that allows the machine to always work as a team, saw unit covered with sound-absorbing material to minimize noise and vibration,
in an adjustable steel base at each point and accurate testing during the various processing stages give the certainty our customers to buy cars practical, economical and reliable technology.
Equivalent continuous acoustic pressure level average 72.0 +/- 2dBA (work in progress).
Full machine of the following accessories:
- Series mobile frame
- 1 llamas - 250 mm for ennobled
- N. 2 retractable aluminium and plastic retractable intermediate supports
- N. 2 measuring stops for vertical cuts
- N. 1 horizontal cut repeater
- N. 3 metric rods on the beam for horizontal cuts
- Engraver group with protected strap complete with conical blade
- Drive with center and bottom metric rod for vertical cuts
- Retractable rollers for panel scrolling
- Extension of retractable tipper intermediate support (All machine)
- Electronic measuring viewer for vertical cuts to liquid crystals
- Electronic display for horizontal cuts to liquid crystals
Technical details
Effective working
Effective length
4200 mm
Effective height
2200 mm
Effective thickness
60 mm
Details
Scoring (Optional)
check_circle
Cut type
Manual
Hidden roll
check_circle
Middle table
check_circle
Generals
Sizes*
5300x1500x2960 mm
Weight*
550 kg
Total kW*
3
*Shown values may vary depending on the configuration of the machine.
Complete engraving group of conical blade (Optional)
In fact, the engraver, rotating in the opposite direction to the blade, avoids the splintering on the melaminic coating by engraving the material only about 1.5 millimeters; The next step of the blade results in a precise, clean and imperfection-free cut.
Engraver group with protected belt complete with registerable blade (Optional)
In fact, the engraver, rotating in the opposite direction to the blade, avoids the splintering on the melaminic coating by engraving the material only about 1.5 millimeters; The next step of the blade results in a precise, clean and imperfection-free cut.
The engraver with protected belt is particularly suitable when you have to cut mainly melaminic panels, so most of the cuts are made with the engraver inserted.
The protection of the belt prevents the cutting powders from depositing on the incisor bearings, greatly lengthening the waist of the belt and the device itself.
Electronic measuring viewer for vertical cuts to liquid crystals (Optional)
The viewer is also customized with software specific to our sectioners, integrating special functions: the automatic calculation of the blade thickness during a series of cuts, the ability to reset the axis at a predetermined point, double blade and cutter measurement, units of measurement in millimeters or inches.
Electronic measuring viewer for horizontal cuts to liquid crystals (Optional)
The viewer is also customized with software specific to our slicers, integrating special functions: the automatic calculation of the blade thickness during a series of horizontal cuts, the ability to reset the axis at a predetermined point, double blade and cutter measurement, units of measurement in millimeters or inches.
Angular cut device (Optional)
The assembly on the machine is very simple and fast, based on a pin that is tucked into a special hole made on the lower supports (X). The use of the device is very easy and intuitive thanks to the quick locks and benchmark metric auctions.
Extension of retractable tipper intermediate support (Optional)
Retractable rollers for panel scrolling (Optional)
By activating one of the two pedals, the rollers go up and the panel can be easily moved to the desired position.
No related machinery.
Request infos
GMC KGS/GMC 400M