BAUSOLA BAT MEC

Assembly bench for frames

A perfect bench for the assembly of frames, doors and windows made of wood and aluminum.
Through the special flyer it allows you to tighten the side to the struts with a tightening force distributed evenly throughout the structure.
Horizontal closing self-centred.
The brackets are drilled at 90 degrees in order to be able to insert nails, staples or fixing screws.
Content in th...

swap_horiz
Discover more open_in_new
nuovo

BAUSOLA BGG

Assembly bench for frames

Particularly suitable for assemblying rubber seals on frame or on doors and for mounting of mechanical parts fittings.
Support plane coated with anti-slip material.
2 support panels or tools and power tools used during the assembly.
Support sizes:

  • Minimum            800 x 1.400 mm
  • Maximun            1800 x 2700 mm (stand manual...

swap_horiz
Discover more open_in_new
nuovo

BAUSOLA BAT

Assembly bench for frames

A perfect bench for assemblying frames, false door frames, doors and windows.
Through pneumatic manual controls tires it permits the latch of horizontal part with the vertical one.
Closing horizontal centering.
The brackets are drilled at 90 degrees in order to be able to insert nails, staples or fixing screws.
Content in the bulk.


Optionals:

swap_horiz
Discover more open_in_new
nuovo

BAUSOLA BAT 0-90

Assembly bench for frames

A perfect bench for assemblying frames,false door frames,doors and windows.
Through pneumatic manual controls tires it permits the latch of horizontal part with the vertical one.
Closing horizontal centering. Control panel for pneumatic movement.
Pneumatic pedal shift for rotation from horizontal to vertical of working plan.
The brackets are drilled at 90 degrees in order to be...

swap_horiz
Discover more open_in_new
nuovo

SAC SUERI TM255

Assembly bench for frames

The TM255 allows to fit in an automatic, semi-automatic or manual mode the hardware on both wood and PVC sashes. The operator can choose the mode directly from a movable control panel. The hardware fitting is executed on already lacquered sashes and also on sashes with middle rail, thanks to a system of retractable cursors The sash is fixed on the working table, coated with felt to prevent damages...

swap_horiz
Discover more open_in_new
usato

SAC SUERI TG 45

Assembly bench for frames

The working table of the TG45 is often used for the final checking of the sashes as well as for puttying and sanding the sashes. The glass bead is then extracted and stapled on the sash by means of a stapler.
The TG45 allows the cut of 2 glass beads at the same time, thanks to its pneumatic system that reads the internal dimension of the sash automatically and to the positioning of the two cu...

swap_horiz
Discover more open_in_new
usato

SAC SUERI TGF

Assembly bench for frames

Reading and cutting bench with 45 ° glazing beads and simultaneous cutting of 2 glazing beads using a pneumatic automatic reading system for the internal dimension and simultaneous automatic positioning of the 2 cutting units.
Cutting of the 4 glazing beads in 2 successive work cycles:

  • 1st reading of the internal dimension and simultaneous cutting of the 2 strips...

swap_horiz
Discover more open_in_new
usato

BT TAMBONE BMI

Assembly bench for frames

The assembly bench offers the possibility of working more easily on the lower side of the window, having the possibility of raising (pneumatically) the work surface, bringing it to the desired height. The piece is clamped by pneumatic pressers in the longitudinal direction.
The bench is used to block the frame through vertical pressers, to make the following operations easier:...

swap_horiz
Discover more open_in_new
usato