BAUSOLA > Machines for production of doors and window frames

Machines for production of doors and window frames

BAUSOLA BAT MEC

Assembly bench for frames

A perfect bench for the assembly of frames, doors and windows made of wood and aluminum.
Through the special flyer it allows you to tighten the side to the struts with a tightening force distributed evenly throughout the structure.
Horizontal closing self-centred.
The brackets are drilled at 90 degrees in order to be able to insert nails, staples or fixing screws.
Content in th...

swap_horiz
Discover more open_in_new
nuovo

BAUSOLA BGG

Assembly bench for frames

Particularly suitable for assemblying rubber seals on frame or on doors and for mounting of mechanical parts fittings.
Support plane coated with anti-slip material.
2 support panels or tools and power tools used during the assembly.
Support sizes:

  • Minimum            800 x 1.400 mm
  • Maximun            1800 x 2700 mm (stand manual...

swap_horiz
Discover more open_in_new
nuovo

BAUSOLA BAT

Assembly bench for frames

A perfect bench for assemblying frames, false door frames, doors and windows.
Through pneumatic manual controls tires it permits the latch of horizontal part with the vertical one.
Closing horizontal centering.
The brackets are drilled at 90 degrees in order to be able to insert nails, staples or fixing screws.
Content in the bulk.


Optionals:

swap_horiz
Discover more open_in_new
nuovo

BAUSOLA BAT 0-90

Assembly bench for frames

A perfect bench for assemblying frames,false door frames,doors and windows.
Through pneumatic manual controls tires it permits the latch of horizontal part with the vertical one.
Closing horizontal centering. Control panel for pneumatic movement.
Pneumatic pedal shift for rotation from horizontal to vertical of working plan.
The brackets are drilled at 90 degrees in order to be...

swap_horiz
Discover more open_in_new
nuovo

SAC SUERI F4

Angle CNC

ow with electronic positioning piece length stop by CN
Blade unit for facing with horizontal NC positioning for defining the tenoning depth
1 precision tenoning spindle
Left electronic positioning profiling guide from CN
2 precision spindle for profiling
1 Glazing bead recovery  unit
1 Dedicated hardware shaft

TENONING CARRIAGE:
Trans...

swap_horiz
Discover more open_in_new
usato

COLOMBO AM 33

Angle CNC

Machine configuration:

Cut-off saw blade, completely retractable inside its guard, with CNC continuous axis horizontal positioning.

2 Counter-supported tenoning spindles, with CNC continuous axis vertical positioning.

Electronic workpiece fence for workpiece length reference.

6 position rotating chipguard

1 Splinter-proof shaft
2 counter-...

swap_horiz
Discover more open_in_new
usato

SAC SUERI F4 S

Angle CNC

Row with manual piece length stop
Blade unit for facing with horizontal NC positioning for defining the tenoning depth
1 precision tenoning spindle
Left electronic positioning profiling guide from CN
1 anti-slip shaft with timed entry
1 precision spindle for profiling
1 Glazing bead recovery unit
TENONING CARRIAGE:
Transmission by chain motor...

swap_horiz
Discover more open_in_new
usato

BAUSOLA STRETTOMATIK

Clamping machines

Machine with patented system completes a cycle started years ago by Bausola to speed up and facilitate the assembly of shutters.
Once the pieces have been placed in the machine (uprights and crosspieces), the distributor arm is started and, automatically, (average time 30 seconds for a balcony door)
distributes the pallets in their correct position, supported by the 2 variable pitch rack...

swap_horiz
Discover more open_in_new
usato

LARI e LARI LB1K

Chisel mortising machine

The LB/1-K has an electronic ram driven by D.C. MOTOR controlled by encoder and managed by computer.
This ram makes it possible to move and position the piece to be chiselled with no manual operation of the operator.
Once the programme set has been performed, a motorised mechanism ejects the piece from the machine completely.
 
During positionning, a system of idle gears under ver...

swap_horiz
Discover more open_in_new
usato

OMGA BA 782 F PH

Assembly bench for frames

The bench BA 782 is used to block the casement in a correct position to easily perform the following operation:

assembling the condensate water drains aluminium profile, assembling the hinge, assembling the windows striker plate, assembling the glass

putting toghether the window casement amd wings

assembling the shutter with the window

making easy yhe un...

swap_horiz
Discover more open_in_new
usato

MASTERWOOD OMB1 CN3K

Chisel mortising machine

Head on ground prismatic guides.
Longitudinal movement by means of d.c. motor.
Motorized vertical stroke.
3 continous controlled axis.
Automatic chipbreaker device.
Fast chisel setting device.
Working height visualizer.
Hydraulic system for the movement of the table on three round sliding bars.
Horizontal and vertical clamping bars.
Automatic lubricatin...

swap_horiz
Discover more open_in_new
usato

MARZANI CIPSY SINTESI

Hinge boring inserting machines

Machine with steel supporting structure, with a mobile operating head along the machine, through screws recirculating spheres,
controlled by a continuous current engine controlled by precision encoders.
Work cycles managed by the numeric control:

  • TEST (step-by-step) allows you to position the operating head to the scheduled interos without performing the proc...

swap_horiz
Discover more open_in_new
usato