BAUSOLA > Used machineries

Used machineries

SAOMAD ROTOWOOD

Angle CNC

Electronic saw - Electronic ruler with extension up to 3 m. with two pins and jacard lever.
ROTOWOOD type increased top.
Piece clamping pliers.
Front locking bar for saw side frame head machining.
Tenoning spindle HSK 100 d. 50 x 320 11 kw motor with automatic joker.
Automatic tool change or Jolly.
N. 2 Shafts for profiling 9 kw HSK 100 connection D. 50 x 320 with aut...

swap_horiz
Discover more open_in_new
usato

LARI e LARI P7

CNC / Pantographs


NC machining  centre for milling, drilling, cutting, profiling, tenoning on wooden oer plastic and composite parts.
Structure in stabilised tubular steel. Running on casehardened and ground guides with bearings with 4 ball re-circulations.
Axis movements with racks and ball re-circulation screws with brushless and direct current motors.

Automatic positioning of X arms.<...

swap_horiz
Discover more open_in_new
usato

SAC SUERI F4

Angle CNC

Row with electronic positioning piece length stop by CN
Blade unit for facing with horizontal NC positioning for defining the tenoning depth
1 precision tenoning spindle
Left electronic positioning profiling guide from CN
2 precision spindle for profiling
1 Glazing bead recovery  unit
1 Dedicated hardware shaft

TENONING CARRIAGE:
Tran...

swap_horiz
Discover more open_in_new
usato

SMC CIPSY CN

CNC / Pantographs

The CIPSY C.N. automatic cable machine has been made with the most advanced technological systems, which together with the robustness of design constitutes the prerogative of precision, reliability and simplicity of learning.

General characteristics:
Linear and circular interpolation of the milling axes.
Axis movements controlled by Personal Computers.
Th...

swap_horiz
Discover more open_in_new
usato

SIMAL MODULO EVOLUTION

CNC / Pantographs

Milling, boring and chisel milling center on wooden or plastic and composite elements.
Structure in stabilized steel tubes. Sliding on casehardened and ground guides with recirculating ball bearings.
Axis movements with racks and recirculating ball screws.
N. 3 interpolated axes (X - Y - Z).
N. 1 HSK 63F electrospindle with 90° - 180° pneumatic control for vertical and horizo...

swap_horiz
Discover more open_in_new
usato

COLOMBO AM 33

Angle CNC

Machine configuration:

Cut-off saw blade, completely retractable inside its guard, with CNC continuous axis horizontal positioning.

2 Counter-supported tenoning spindles, with CNC continuous axis vertical positioning.

Electronic workpiece fence for workpiece length reference.

6 position rotating chipguard

1 Splinter-proof shaft
2 counter-...

swap_horiz
Discover more open_in_new
usato

SCM L'invincibile SI 3

Circular saw blade

Sliding carriage: maximum cut quality guaranted over time.
Mobile control panel.
Electronic adjustment for scoring unit.
Start/stop pushbuttons integrated in the carriage.
Squaring fence with LCD readouts for the stops.
Squaring capacity with 3200 carriage - 3200x3200 mm
Maximum cutting height at 90° 0 140 mm
Maximum cutting height at 45° 0 97 mm
Main blad...

swap_horiz
Discover more open_in_new
usato

LARI e LARI FR300 TA

CNC / Pantographs

Fixed table machining centre capable of milling, drilling and cntouring pieces of wood and plastic.
Two high frequency electric spindles, one vertical and the other horizontal, with revolutions ranging by means of an inverter.
Linear, circular, helicoidal, spline and point interpolation.
Axis movemens take place on hardened and ground roller guides by means of direct current motors and...

swap_horiz
Discover more open_in_new
usato

CASOLIN F90KL

Spindle moulds

The structure is greatly resistant to torsion and bending.
Sliding takes place on prismatic guides made of special tempered steel with interposition of balls.

Automatic interchengeable shaft
The fast interchangeable spindle HSK, which is supplied on request, is fixed to the shaft of the machine through an automated locking device
The latter is for those who need to change...

swap_horiz
Discover more open_in_new
usato

A.COSTA EURO K23D

Planers / Throughfeed Moulders

Moulder designed to meet the needs of small and medium-sized industries that require a high degree of production flexibility.

Machine composition:

Lower horizontal shaft
Right vertical shaft
Left vertical shaft
Upper horizontal shaft
Lower horizontal shaft
Universal Tree

Variable feed speed 5/25 m/min
Feed roller diameter 140 mm
D...

swap_horiz
Discover more open_in_new
usato

SBF 2W226

Sanding machines / Wide belt sanders

This machine is ideal for the calibrating and sanding of solid wood and sanding of veneered panels.

Abrasive belt development 2620 mm
Sanding belt speed 18 m/sec
Feed speed n. 2 (5/10 m/min)
Machine air consumption 100 Nl/min (consumption measured with blower excluded)
Blower air consumption 750 l/min

swap_horiz
Discover more open_in_new
usato

GRIGGIO CA 400 E

Circular saw blade

The aluminium sliding table on high position hardened and polished steel bars guides.
Double sliding roller on the outher side. It is necessary for sliding tables with length bigger than 2500 mm
Motorized lifting movement of the blade
Motorized tilting movement of the blade with LCD electronic digital read-out

swap_horiz
Discover more open_in_new
usato