Used machineries

GABBIANI GABB 6.429

Edgebander

Complete with phone for edge re-welding

BOLMAR MC2

Suction

General features:

N of bugs - N. 2 Ø 600
Filtering Surface - 5,4 mq
Power - (Kw 4,0 - HP 5,5)
Motor - Three-phase
Eight-blade impeller in welded iron
Switch - whith a low voltage coil
Intake opening Ø - 250 mm
Maximum acoustic pressure detected - Liv. Eq. 89,5 - HP5,5

BINI ES

Sanding machines / Wide belt sanders

Cast iron frame
Lenght of the table 3000 mm
Width of the table  800 mm
Automatic vertical stroke of the table 550 mm
Main motor power 3-4 HP
Suction motor power 1 HP
Automatic lifting of the table 0,5 HP
Max. Lenght of the sanding belt 7900 mm
Min. Lenght of the sanding belt 7800 mm
Std width of the sanding belt 150/120 mm

CASADEI LINEA 43.32

Horizontal panel saws

The pressure bar consists of a rigid tubular steel structure with a large contact surface with the material being processed.
A special duct, obtained inside the bar itself, allows the suction of chips above the blade.
The motorized pusher, in a tubular structure, allows, through a sturdy torsion bar with sprockets and racks, the exact positioning of the panel in work.
The blade wago...

SAC SUERI CS1 1000

Sanding machines / Wide belt sanders

Working width: 1000 mm
Two feed speeds
Free rollers present at the entrance and exit

SAOMAD UTP 150/6

Tenoning machines

All suction hoods on the upper part of the machine
Quick setting for position of all heads both vertical and horizontal by mechanical digital readouts
Pneumatic wood holders
Counterwood
Tenoning carriage mounted on large dia round bar, rectified and securely fastened

Circular saw unit:
Spindle d. 30
Motor power 3 kW
Rpm saw motor 3000<...

FIN CP86 - 800

Slot cutting for window-shutters

Three-phase motor hp2
Tip turns 14.000
Slot inclination adjustable from 0° to 65°.
Possibility to execute up to a radius of 800 mm

OMGA TSF 717

Cutting-off

A single blade mitre crosscut saw used to cut glazing bead shaped and tenoned on angle systems.
The machine is equipped with an adjustable pneumatic stop positioned in relation to the shoulder of the tenon.
Cuts two beads at a time, clamping them together by means of a double holddown assembly (vertical and orizontal).

BINI CM80-T

Bit mortisers / Slot boring machines / Drilling machines

This type of machine is used to collect retractable hinges, make lock housing, make slots that must accommodate the grafts of the crossbars of the lams.

The pointy quarryman adapts to any kind of carpentry, for small and large companies.

The routine maintenance of the wood quarryman does not need special operations: weekly or daily cleaning to remove dust, sawdust or wood chi...

CECCATO CRA 10

Compressors

Complete with DSX 1200 dryer.

MASTERWOOD OMB1 V

Chisel mortising machine

Chisel mortiser with manual lowering of the working unit
Max working height of single element in solid wood 170 mm
Manual vertical stroke 150 mm
Longitudinal stroke 260 mm
Transversal stroke 70 mm
Worktable 140 x 470 mm
Pneumatic workpiece locking

SCM P64B

Planers / Throughfeed Moulders

Electric vertical axis
Manual Horizontal axis with adjustment via displayed sicod
2 feed speeds 6-12 m / min
Adjustment stroke of the vertical and top horizontal shafts 15 mm
Motor power vertical shafts 5.5 kW
Lower horizontal shaft motor power 4.0 kW
Upper horizontal shaft motor power 4.0 kW
Feed motor power 1.25 kW
N. 2 Suction ports d. 120 mm
N. 2 Su...