FELDER RL 250

Aspiration systems

Clean air for a healthy workshop
The Felder RL 250 clean air dust extractor combines compact design with optimal extraction performance and requires minimal space in the workshop. The high extraction performance makes it possible to simultaneously use the extraction on several machines. The Felder RL 250 is “GS”, “BG” and “H3” (remaining dust content <0,1mg/m³) te...

swap_horiz
Discover more open_in_new
nuovo

FELDER RL 200

Aspiration systems

Clean-Air Dust Extractors
For trade and industry, Felder offers certified clean-air extractors in various price and performance categories. The Felder clean-air extractors RL 125, RL 140, RL 160, RL 200, RL 250, RL 300 and RL 350 filter the air to the extent that the residual dust is under 1 mg/m³. This means that all three extractors comply with “Category H3”.

swap_horiz
Discover more open_in_new
nuovo

FELDER RL 350

Aspiration systems

Clean air for a healthy workshop
The fact that there is wood dust in workshops is clear and it has also been well known for some time that the dust is classified as a health hazard, but it is only recently that dust extraction in this industry has become a real talking point. An EU legislation soon to come into force will allow companies that have an air filter requirement of up to 8000 m³/h ...

swap_horiz
Discover more open_in_new
nuovo

BOLMAR MC2 HP5,5

Aspiration systems

General features:

  • N of bugs - N. 2 Ø 600
  • Filtering Surface - 5,4 mq
  • Power - (Kw 4,0 - HP 5,5)
  • Motor - Three-phase
  • Eight-blade impeller in welded iron
  • Switch - whith a low voltage coil
  • Intake opening Ø - 250 mm
  • Maximum acoustic pressure detected - Liv. Eq. 89,5 - HP5,5

swap_horiz
Discover more open_in_new
nuovo

OMA ASPIRAZIONE HOBBY SUPER 8B/55

Aspiration systems

Employed for suction and filtration of wood shavings and dust.
It has the same technical characteristics of mod. Hobby, with the addition of a bigger filtering surface.
Suitable for small handicraft factories and hobbies.
Furnished with filtering sleeves Ø 200 h 1600 mm, in fabric of genuine cotton 350 gr/m2 with Snap Ring, electrical vane aspirator, collecting bag in nylon Ø 500 ...

swap_horiz
Discover more open_in_new
nuovo

FELDER RL 250

Aspiration systems

Clean air for a healthy workshop.

The Felder RL 250 clean air dust extractor combines compact design with optimal extraction performance and requires minimal space in the workshop. The high extraction performance makes it possible to simultaneously use the extraction on several machines. The Felder RL 250 is “GS”, “BG” and “H3” (remaining dust content <0,1mg/m³) tested. Whe...

swap_horiz
Discover more open_in_new
usato