Traditional machines

OMGA TSF 717

Cutting-off

A single blade mitre crosscut saw used to cut glazing bead shaped and tenoned on angle systems.
The machine is equipped with an adjustable pneumatic stop positioned in relation to the shoulder of the tenon.
Cuts two beads at a time, clamping them together by means of a double holddown assembly (vertical and orizontal).

BINI CM80-T

Bit mortisers / Slot boring machines / Drilling machines

This type of machine is used to collect retractable hinges, make lock housing, make slots that must accommodate the grafts of the crossbars of the lams.

The pointy quarryman adapts to any kind of carpentry, for small and large companies.

The routine maintenance of the wood quarryman does not need special operations: weekly or daily cleaning to remove dust, sawdust or wood chi...

SCM P64B

Planers / Throughfeed Moulders

Electric vertical axis
Manual Horizontal axis with adjustment via displayed sicod
2 feed speeds 6-12 m / min
Adjustment stroke of the vertical and top horizontal shafts 15 mm
Motor power vertical shafts 5.5 kW
Lower horizontal shaft motor power 4.0 kW
Upper horizontal shaft motor power 4.0 kW
Feed motor power 1.25 kW
N. 2 Suction ports d. 120 mm
N. 2 Su...

SCM P64

Planers / Throughfeed Moulders

2 feed speeds 6-12 m / min
Adjustment stroke of the vertical and top horizontal shafts 15 mm
Motor power vertical shafts 5.5 kW
Lower horizontal shaft motor power 4.0 kW
Upper horizontal shaft motor power 4.0 kW
Feed motor power 1.25 kW
N. 2 Suction ports d. 120 mm
N. 2 Suction ports d. 150 mm

FELDER AD 741

Surfacing planers / Thicknessing planer

Planer shaft with self-calibrating knives for a better planing result
Professional planer guide that guarantees space saving and maximum ease of use
Double opening of the planer planes with support to traction springs, very easy and fast

Four-knife planer shaft Felder system
The planer shaft with 4 knives helps save time thanks to the quick change of knives.
The self...

OMGA TRF 527 NC

Cutting-off

Double Mitre Saw for cutting glass beads.
Motorized moving head positioning with numerical control
N° 2 1.18 kW motors
Maximum standard cutting length 2380 mm
Min cutting length 157 mm
Max cutting section at 45° - N° 2 strips of 40 x 40 mm
N. 2 Suction vents d. 80 mm

SAC SUERI LT 110

Spindle moulds

The spindle unit directly connected to the cast iron frame ensures highest rigidity and accuracy
Heavy duty cast iron frame casted with spindle connected column
Star-delta starter

Table dimensions 1100X700 mm
Table height 870 mm
Vertical stroke of spindle 140 mm
Max profiling tool diameter 240 mm
Spindle speed rpm 3200/4200/6000/8000

BAUSOLA FC 2T

Milling machines

Milling machine with fully automatic cycle.
It performs the tenons gleaning and the heels on the traverse.
Possibility also to perform tenons on the slats of shutters.
By means of a 4-position revolver it allows the adjustment of the different ones.
heel lengths to be performed.

Technical features:
N. 2 multi-cutting heads with scoring blade and sharpener diam. ...