Traditional machines

SAOMAD UTP 150/6

Tenoning machines

All suction hoods on the upper part of the machine
Quick setting for position of all heads both vertical and horizontal by mechanical digital readouts
Pneumatic wood holders
Counterwood
Tenoning carriage mounted on large dia round bar, rectified and securely fastened

Circular saw unit:
Spindle d. 30
Motor power 3 kW
Rpm saw motor 3000<...

OMGA TSF 717

Cutting-off

A single blade mitre crosscut saw used to cut glazing bead shaped and tenoned on angle systems.
The machine is equipped with an adjustable pneumatic stop positioned in relation to the shoulder of the tenon.
Cuts two beads at a time, clamping them together by means of a double holddown assembly (vertical and orizontal).

BINI CM80-T

Bit mortisers / Slot boring machines / Drilling machines

This type of machine is used to collect retractable hinges, make lock housing, make slots that must accommodate the grafts of the crossbars of the lams.

The pointy quarryman adapts to any kind of carpentry, for small and large companies.

The routine maintenance of the wood quarryman does not need special operations: weekly or daily cleaning to remove dust, sawdust or wood chi...

SCM P64B

Planers / Throughfeed Moulders

Electric vertical axis
Manual Horizontal axis with adjustment via displayed sicod
2 feed speeds 6-12 m / min
Adjustment stroke of the vertical and top horizontal shafts 15 mm
Motor power vertical shafts 5.5 kW
Lower horizontal shaft motor power 4.0 kW
Upper horizontal shaft motor power 4.0 kW
Feed motor power 1.25 kW
N. 2 Suction ports d. 120 mm
N. 2 Su...

CELASCHI PROGRESS 30

Tenoning / Squaring machines

This automatic squaring tenoner with manual loading and unloading is designed for processing solid wood, chipboard, fiberboard, and plywood, as well as materials covered with plastic laminates and/or edgebanding.

The machine is designed to process workpieces with the following dimensions:

Length: min. 210 mm - max. 3000 mm
Width: min. 210 mm - max. 3000 mm
Thickness...

BOLMAR MC2

Suction

General features:

N of bugs - N. 2 Ø 600
Filtering Surface - 5,4 mq
Power - (Kw 4,0 - HP 5,5)
Motor - Three-phase
Eight-blade impeller in welded iron
Switch - whith a low voltage coil
Intake opening Ø - 250 mm
Maximum acoustic pressure detected - Liv. Eq. 89,5 - HP5,5

FELDER AD 741

Surfacing planers / Thicknessing planer

Planer shaft with self-calibrating knives for a better planing result
Professional planer guide that guarantees space saving and maximum ease of use
Double opening of the planer planes with support to traction springs, very easy and fast

Four-knife planer shaft Felder system
The planer shaft with 4 knives helps save time thanks to the quick change of knives.
The self...

OMGA TRF 527 NC

Cutting-off

Double Mitre Saw for cutting glass beads.
Motorized moving head positioning with numerical control
N° 2 1.18 kW motors
Maximum standard cutting length 2380 mm
Min cutting length 157 mm
Max cutting section at 45° - N° 2 strips of 40 x 40 mm
N. 2 Suction vents d. 80 mm

BAUSOLA FC 2T

Milling machines

Milling machine with fully automatic cycle.
It performs the tenons gleaning and the heels on the traverse.
Possibility also to perform tenons on the slats of shutters.
By means of a 4-position revolver it allows the adjustment of the different ones.
heel lengths to be performed.

Technical features:
N. 2 multi-cutting heads with scoring blade and sharpener diam. ...