Machines for production of doors and window frames

SAC SUERI F40 TL

Angle CNC

Row with electronic positioning piece length stop by CN
Blade unit for facing with horizontal NC positioning for defining the tenoning depth
1 precision tenoning spindle
Left electronic positioning profiling guide from CN
3 precision spindle for profiling
1 Glazing bead recovery unit

TENONING CARRIAGE:
Transmission by chain motor with speed...

SAC SUERI F60

Angle CNC

Row with electronic positioning piece length stop by CN
Blade unit for facing with horizontal NC positioning for defining the tenoning depth
2 precision tenoning spindles
Left electronic positioning profiling guide from CN
3 precision spindle for profiling
2 Glazing bead recovery unit
1 Dedicated hardware shaft

TENONING CARRIAGE:
Trans...

COLOMBO AM 33

Angle CNC

Machine configuration:

Cut-off saw blade, completely retractable inside its guard, with CNC continuous axis horizontal positioning.

2 Counter-supported tenoning spindles, with CNC continuous axis vertical positioning.

Electronic workpiece fence for workpiece length reference.

6 position rotating chipguard

1 Splinter-proof shaft
2 counter-...

CELASCHI PROGRESS 42 N

Squaring machines / Double end Tenoners

MARZANI REGO

Clamping machines

Iron beam structure.
Max pressure 110 bar.
N. 2 d. 80 x 1100 vertical cylinders.
N. 2 d. 50 x 1200 horizontal cylinders.
Height adjustable lower i-beam.
Machine featherd manual controls through push button panel.
4 positions manual squadres.

BAUSOLA STRETTOMATIK

Clamping machines

Machine with patented system completes a cycle started years ago by Bausola to speed up and facilitate the assembly of shutters.
Once the pieces have been placed in the machine (uprights and crosspieces), the distributor arm is started and, automatically, (average time 30 seconds for a balcony door)
distributes the pallets in their correct position, supported by the 2 variable pitch rack...

FIN CP86 - 800

Slot cutting for window-shutters

Three-phase motor hp2
Tip turns 14.000
Slot inclination adjustable from 0° to 65°.
Possibility to execute up to a radius of 800 mm

ITALPRESSE PROGRAM

Clamping machines

Hydraulic clamp for gluing fixtures.
Rack device for horizontal crosspiece parallelism control
N. 4 horizontal squares
N. 2 vertical beams

MARZANI LB1 M

Chisel mortising machine

With just a pair of tools you can make: fork mortises, bottomless mortises, blind mortises, mixed mortises.
Still with the same pair of tools you can change: the lenght of the mortises and the depth of the mortises.
The operating head is equipped with a special device that archives total and perfect balance. both static and dynamic.
The machine is equipped with a stop halder bar of ...

SAOMAD OPERATOR 4

Angle CNC

Row with manual piece length stop
Blade unit for facing with horizontal positioning
1 precision tenoning spindle
Left electronic positioning profiling guide from manual
2 precision spindle for profiling
1 Glazing bead recovery    unit

CUTTING-OFF UNIT:
Blade diameter 400 mm
3 kW motor power
Blade speed 3000 rpm

1ST TENONING SPINDLE:<...

SAC SUERI F4 TL

Angle CNC

Row with electronic positioning piece length stop by CN
1 precision tenoning spindle
Left electronic positioning profiling guide from CN
2 precision spindle for profiling
1 Glazing bead recovery unit

TENONING CARRIAGE:
Transmission by chain motor with speed variator
Variable working speed 3-10 m / min
1,1 kW motor power 
Automatic splint disc