—
BAUSOLA MULTITRON
Cutting-off, defecting, optimising and chamfering machine for louvers of shutters
Effective length:
6000 mm
Blade diameter:
350 mm
Defecting machine
Optimizer
Description
Cutting-off, defecting, optimising and chamfering machine for louvers of shutters
BAUSOLA MULTITRON
Automatic cycle of cutting and chamfering.
Possibility of selecting many typologies in order to optimise (min waste, max length...).
Full of:
Vertical loader for louvers
Clamp pusher
Defect reading and self measurement of piece length
Upper blade
Returning of cut-off pieces to the operator with storage under the loader top
Automatic cutting-off and chamfering cycle
Touch screen monitor with dedicated software
Possibility of loading distinct for office Ink-jet print or label marker
Technocal specifications:
- Sizes: 10000x1500x1550 mm
- Minimum-maximum thickness chamfering 8-30 mm
- Minimum-maximum width chamfering 20-100 mm
- Minimum-maximum length chamfering 100-800 mm
- Blade Ø 350/400 mm
- Maximum section cutting 150x100 mm
- Wood floor support 6000 mm
- Vertical loader for louvers maximum length 5000 mm
- N. 1 suction duct Ø 60 mm
- N. 1 suction duct diam. mm 120 mm
- N. 3 motors (2 rotation milling cutters and 1 return mat ) 0,37 kW each
- N. 1 feed motor chains 0,18 kW
- N. 1 blade motor 3 kW (hp 4)
- N. 1 0,12 kW power motor for shift mobile shoulder with
- N. 1 Brushless motor for clump pusher 750 W
- N. 4 rasps for chamfer inclination 30°
- Down 3-speed blade for cutting aluminum - wood
- Automatic loader pushing of louvers in the chamfering
- Pushing system with pneumatic nipper and back scraps ejector with Brushless motor
- Reading with the defects observed by optical fluorescent crayons
- Blade group for cutting
- Pushing system cutting luvers in chamfer unit
- System for back offload of luvers,styles or treansom scraps
- Operator and back pieces by carpet
- Monitor touch screen with PLC exit, parallel for printer, net
- Dedicated software
- Variable chamfering speed controller by inverter
- Possibility of working any profile of pallets
Technical details
Effective working
Effective height
100 mm
Effective width
150 mm
Effective length
6000 mm
Details
Cut
Automatic cutting-off machine
Blade diameter
350 mm
Superior cut
check_circle
Defecting machine
check_circle
Optimizer
check_circle
Chamfer
check_circle
Software/C.N.
Optimising software
check_circle
Generals
Sizes*
9500x1500x1600 mm
Weight*
1600 kg
Total kW*
5
*Shown values may vary depending on the configuration of the machine.
Pushing system with pneumatic nipper and back scraps ejector with brushless motor
The clamp is complete with automatic piece length reading and lens for detecting defects on wood (knots, resin pockets, etc.).
The electronic management of this device makes it possible to optimize the cutting sequences to the maximum reducing the production waste.
Blade group
N. 3 cutting speeds programmable by numerical control, give the possibility to be able to cut, aluminum, uprights and slats of shutters.
Thanks to top-down cutting with guides and recirculating ball shoes, chipping is effectively reduced.
Chamfering group with amovable shoulder cn control
This group, incorporated together with the cutting unit, forms a perfect combination to achieve a high quality production result without losing productivity.
Automatic piece return
This device being incorporated inside the machine, does not affect the overall surface and avoids continuous movement by the operator, thus increasing productivity.
Cut off pieces warehouse
This simple but functional design trick reduces considerably the movements of the operator, allowing him to always be in an optimal position both for the loading and unloading functions.
Vertical loader for louvers
Related machineries
BAUSOLA UNITRON
Cutting-off
Cutting-off, defecting, optimising machine for wooden bars
BAUSOLA UNITRON
Cutting-off
Automatic cutting-off cycle.
Possibilità of selecting many typologies in order to optimise (.min waste, max length...).
Equipped with:
Vertical louder
Defect reading and self measurement of piece length
Upper blade
Returning of cut-off pieces to the operator with storage under the loader top
Touch screen monitor with dedicated software
BAUSOLA STEKTRON
Cutting-off
Cutting-off, defecting, optimising and chamfering machine for louvers of shutters
BAUSOLA STEKTRON
Cutting-off
Suitable for working of louvers of shutters
Possibility of selecting many typologies in order to optimise (min waste, max length...)
Equipped with:
Vertical loader for louvers
Clamp pusher,defect reading and self measurement of piece length
Upper blade
Touch screen monitor with dedicated software
Possibility of loading distinct for offic...
Request infos
BAUSOLA MULTITRON